Monthly Archive for March, 2008

If at first…

yadda, yadda, yadda – try again.

Once I had a new hat to put on my head I decided it was time to do something about the puckery top on my silver-grey beret (Ravelink).

beretpuckery.jpg

After frogging back to the beginning of the decrease rounds, I tried a couple of things. The original decreases were 8 stitches every row. I tried 8 stitches every other row, but that wasn’t quite right either. I got good results in shaping with 6 stitches every row, but I still had those extremely crisp decrease lines that I just didn’t like anymore, so I finally went with a decrease of twelve stitches every other row.

grberet2back.jpg

One of the things that amazes me most with this yarn, Georga 100% wool, is the ways it blocks so beautifully. I had blocked the beret over a dinner plate the first time and it was gorgeous and smooth. You can see how uneven the centre portion is right after knitting, especially compared to the blocked bit.

beretpreblock.jpg

I just laid it out flat this time around and it’s not quite as smooth as the previously blocked area, but there’s still a huge difference. Most of the unevenness has disappeared and a proper blocking would certainly take care of the rest.

beretpostblock.jpg

I’m just too lazy for that.

grberet2.jpg

Yea, Verity

I’ve been admiring Ysolda’s berets for some time now. I knit up a couple of Urchins (Ravelink) last fall for gifts, and Kelly has been sporting the lovely Gretel for most of the winter. As soon as I saw this pattern I knew I it was the one for me. Luckily I had some yarn in may stash that would work, because I decided I really shouldn’t buy any yarn this month (that only stuck for about half the month, but at least it kept me from going nuts, what with Kathmandu tweed close-out at Webs, odd lots and super deals at Colourmart, and a great sale at Pick-Up Sticks). It’s the same yarn I used for my silver beret, in a different colour, Georga 100% wool, this time in Aran. I really do love a yarn that knits up easily and evens out amazingly after blocking :)

veritybutton.jpg

Because it’s not as heavy as an aran-weight yarn I got slightly more stitches to the inch than the called-for gauge. I didn’t want to use a larger needle, though, as I really prefer a somewhat tightly knit fabric for most things (I used this same yarn with a 4mm needle for my silver beret). So I simply used one larger size instructions and that worked out very well for me.

verityback.jpg

The first part of the hat whipped right along. I love the petal shaping. I had one false start on the band, casting on too loosely. The linen stitch really snugs up the fabric and makes a nice dense band and that left me with a sloppy end. I restarted and joined it to the hat stitches. This part took a little longer to knit, being a slip-stitch pattern, but well worth it. Picking out the button was almost as much fun as knitting the hat! After digging through 3 generations of buttons, I found a lovely mother of pearl flat button, lovely in itself, but it doesn’t overtake the hat.

I’ve received many compliments on it, and I may just have to make another in some different yarn :)

verityflat2.jpg

pattern: Verity, by Ysolda Teague
yarn: Geoga 100% wool, Aran
needles: 4.5 mm 16″ KnitPick’s nickel circ, Aero circ, Bryspun dpns
Simple and ingenious shaping, the main portion in stockinette, fast and fun to work. As an aside, the yarn changed colour after washing. It had a definite pinkish cast to it in the ball, but that’s not visible at all now.

Booties, Baby!

With new cousins popping up all over the place I have decided I need to knit some baby things. My mother bought a little outfit for a new little girl in our family and I figured that was the perfect chance to try out Saartje’s Booties, especially after seeing Kelly’s. I went with Fleegle’s seamless version, and by the third bootie I managed to achieve something decent looking.

I have a propensity to dive into patterns without fully reading them, and this time was no different. I managed the Turkish cast-on just fine. In fact, it’s easier than Judy’s Magic Cast-on since there are no twisted stitches. But, somehow, whenever I came to an increase or decrease I chose to knit the wrong type. Not just on one bootie, but two!. Finally I set the yarn and needles aside and really read the pattern. By this time I had picked up on a couple of other things that needed tweaking as I knit — I kept getting a gap where I cast on the new stitches for the straps, so I tightened that up, and finally got a nice little crocheted button hole (I discovered that I’m an even lazier knitter than I thought; I put off the button holes for two days before I finally went and dug out a crochet hook :P). So the third little bootie came out very well, and the mate knit up in no time.

Then came the button selection (yay! I love buttons!). I was warned away from the gumdrop looking ones — experinced mothers told me never to use something that looks edible :). The pink buttons were too pink and the purple buttons were too purple, except for one set that was the perfect colour, but too small (can you say Goldilocks?). I found some that looked okay, but they really aren’t what I wanted, which was little round pearl puttons. The ones I finally went with are flat. They’re cute enough, though, so on they went.

bambooties1.jpg

Yesterday they got a little wash and tomorrow they go in the mail. C’est tout fini!

Of course, baby booties are like potato chips so I had to try a few other patterns.singlebooties2.jpg

The green one is Bev’s Stay On Knit Bootie. Super easy. I used a 3-needle bind off for the front of the ankle to eliminate one seam, You could use a turkish cast-on, purling the first row and working back and forth after that to make a truly seamless bootie, but I don’t mind that single 2-1/2″ seam.

The little variegated slipper is SockPixie’s Magic Slipper. These ones are seamless, with a sole knit flat and stitches picked up and worked in the round. Cute and easy and a nice way to use up leftover sock yarn.

The light blue one is a variation of the magical bootie-from-3-squares (Susan B. Anderson has a free pattern for those on her blog). I wanted to see if I could avoid some of the seaming on these, so I made one square, then, leaving the stiches live, picked up the stitches from another edge of the square and worked a mitred triangle. It functions, and creates some interesting directional patterns too. I think I might play with the form a little more.

As for mates for these little fellas, who knows? I kinda just like them hanging on my bulletin board.

bambooties2.jpg

Bam-Booties for Jenna
pattern: Sartje’s Booties, Fleegleized. (Ravelry links)
yarn: Sirdar Snuggly Baby Bamboo, Babe
needles: 2 KnitPick’s 2.5mm circ’s

I really have to say I love this yarn. It is so soft and knits up like a dream. The stitches seem to even themselves out before you even get near to blocking. I used a much smaller than recommended-needle-size. I wanted a fairly close-knit fabric for booties, but I imagine working with a 4mm needle would give you something incedibly drapey. I found myself wanting to knit a bathrobe with it! Not likely to happen. I’m a big girl and that would take way more patience that I have. Since it is so reasonbly priced, about $6 Canadian, I expect I will knit a lot more little baby things with it and maybe even a summer top or two for me.

bambooties3.jpg